Statiдќko Usmjeravanje.pkt -

: Entering specific ip route commands so that a computer on one network can "ping" a computer on a distant network.

A standard lab exercise for this topic usually involves the following steps:

: Connecting routers and PCs using appropriate cables (e.g., Serial or Ethernet). StatiДЌko usmjeravanje.pkt

: Unlike dynamic routing protocols, information about destination paths is entered into the router's routing table manually.

: Assigning IP addresses and subnet masks to all interfaces. : Entering specific ip route commands so that

: Using commands like show ip route to check the routing table and ping to test connectivity.

: To configure a static route on a Cisco router, the general command used is: Router(config)# ip route [destination_network] [subnet_mask] [next_hop_address_or_exit_interface] . Typical Lab Exercise Tasks ( .pkt file) : Assigning IP addresses and subnet masks to all interfaces

For more detailed guides and exercises, you can find resources on educational portals such as Marko Svečak - Vježba: Statičko usmjeravanje or download theoretical overviews from Scribd - Usmjeravanje .