Once the files are extracted and the hardware is connected, follow these steps to flash the firmware:
: Right-click the downloaded .rar file and select "Extract Here" or "Extract to [Folder Name]" .
: Plug the RS-232 cable into both the PC and the receiver. Run Loader : Open the extracted loader software on your PC. Select Port & File : Choose the correct COM Port (usually COM1 or COM2). Once the files are extracted and the hardware
To download and use a loader for an ALi processor receiver (often provided in .rar format), you need to extract the files using specialized software and connect your receiver to a PC using an RS-232 cable. This process is commonly used to upgrade firmware or recover "dead" receivers that no longer boot. Since loader files for ALi chips (like the ALi M3329C or
: Set the upgrade type to "allcode + bootloader" for a full flash. Select Port & File : Choose the correct
: Download and install a tool like WinRAR or 7-Zip.
: Press the "Next" or "Start" button in the software. Since loader files for ALi chips (like the
) are usually compressed into .rar archives, you must first extract them.